With the new round of cooling, most areas ushered in the real winter, the frequency of outdoor camping is reduced, and the opportunities for portable power stations may be reduced, so how to store and maintain portable power stations?
1. The portable power station should be stored to prevent overcooling and overheating
Do not expose the portable power station to excessive heat: high temperatures can shorten the life of electronic devices, damage the portable power station, and warp or melt some plastic parts. Also do not store the portable power station in a place that is too cold such as a balcony, outdoors, etc., because when the portable power station works in an extremely cold environment, when the internal temperature rises, moisture may form in the portable power station and be damaged The circuit board, thus due to the excessive temperature difference, the moisture has caused some safety accidents.
2. The portable power station should be placed in a dry environment
All kinds of electrical appliances need to be placed in a dry environment with low air humidity, and the environment with high humidity is not good for the preservation of all kinds of electrical appliances. Therefore, for the service life of your portable power station, please try to keep the portable power station The station should be placed in a dry environment. Do not place it in damp places such as kitchens, bathrooms, basements exposed to rain and damp, and corners of unenclosed balconies.
3. The portable power station should pay attention to anti-shock
The internal structure of the portable power station is complex, and the components such as internal batteries and circuit boards are very precise and cannot withstand violent beating. So do not throw, knock or shake the portable power station, the rough handling of the portable power station will damage the internal circuit board. Therefore, when you move it from the car or go upstairs to store it at home, put it in a safe place, don't move it back and forth, and don't shake it hard, as it may bump or beat.
4. Shallow charging and shallow discharge prolong life
Shallow charge and shallow discharge means that the charge is not full and the discharge is not completed, so as to prevent overcharge and overdischarge from causing some abnormal fluctuations in the single cell, which will cause the final battery pack to fail to work. So don't wait until the portable power station is 100% completely drained before charging. Especially when storing for a long time, you must remember to observe it carefully. Proper charging or discharging is a good way to prolong the life of the portable power station.
5. If you don’t need to store it for a long time, you should avoid too much power loss
If the portable power station will not be stored for a long time, you should avoid leaving the power supply in a state of low power for a long time, and it is best to keep the power at 50%. Although the portable power station has its own solar panel for light energy and micro-current protection, as long as it is stored in a place with light, it will never lose power. However, if you store it in a completely dark space, you still need to check it regularly. Try to charge it every 3-6 months, which will help prolong the service life of the portable power station and avoid re-use Occasionally a power outage occurs.
