How to maintain or use the portable power station correctly? The main function of the portable power station is to store electric energy. Once the mains power is interrupted, the battery discharges and supplies to the inverter, and the inverter converts the direct current released by the battery into a sinusoidal alternating current to maintain the power output. , so how do we use portable power station correctly in our daily life? The editor of this article is here to tell you.
1. The first charge must be skillful
The portable power station is pre-charged at the factory with less power. For a better user experience, please plug the portable power station into a 220V power grid and charge it to 100% before using it (refer to the manual for specific charging time). If the power supply is not used for a long time, check its power every 2 to 3 months, and recharge it in time according to the power situation.
2. Reasonable choice of placement
Good placement is very important. The place where the power supply is placed must be well ventilated and kept away from water, flammable gas and corrosive substances. The ambient temperature should be between 0 and 40°C, and the air inlet and outlet should be kept unobstructed. It is forbidden to use or place the product under high temperature (under direct sunlight or in a very hot car), otherwise it may cause risks such as internal battery overheating, function failure, and life shortening.
3. Avoid overloading the portable power station
When using the portable power station, first determine the power of the load device, and the power of the load device should be less than or equal to the rated power of the portable power station. If the power of the load device exceeds the power of the portable power station, the portable power station will overheat, and the overload protection will make it unusable.
4. The portable power station should try to avoid being idle for a long time
For the portable power station that has not been used for a long time, check its power every 2 to 3 months, and charge and replenish the power in time according to the power situation; prevent long-term battery self-discharge and circuit self-consumption from causing over-discharge of the power battery and affecting battery life .
5. Operation and maintenance
After the LCD display switch button is pressed, the screen display lights up, and the screen backlight automatically turns off after about 10 seconds; after the DC output and AC output buttons are pressed, when the green light next to the port is on, the output port has been turned on, and the corresponding device can be powered on. To supply power; when the power port output is not in use, press the output button to turn it off to save power.
6. Precautions
It is forbidden to disassemble portable power station products, which may cause unpredictable risks such as fire, explosion or electric shock; it is forbidden to use damaged wires or plugs, or damaged output cables to use products; in order to reduce risks, when Close supervision is required when using this product near children.
