Portable power station has been widely used in our life and can play an important role at home and outdoors. It solves the problem of outdoor electricity consumption and facilitates everyone's work and life. What are the effective ways to extend the battery life of outdoor portable power supplies?
1. Avoid overloading the power supply
When using a portable power station, not only should you calculate the size of the load, but you should also pay attention to whether the load is too large or too small. A reasonable load should be controlled between 50% and 80%.
2. Reasonably choose the installation location
A good installation location is very important. The place where the portable power station is placed must have good ventilation, and keep away from flammable and explosive items, corrosive gases, liquids, etc.
3. Suitable environment and temperature
The ambient temperature should be kept between 0 and 40°C. If it is disassembled and used at low temperature, water droplets may condense. Once the ambient temperature exceeds 25 degrees, the life of the battery will be cut in half for every 10 degrees increase. At present, the batteries used in the power supply are generally maintenance-free sealed lead-acid batteries, and the design life is generally 5 years.
4. Correct installation
The portable power station should not be placed on its side, and the air inlet and outlet holes should be kept unobstructed; when replacing the battery, it is not suitable to replace it individually, it is best to replace it as a whole. In addition, it is forbidden to combine batteries with different amperage and different brands.
5. Charging skills for the first time
After purchasing a new portable power supply, connect it to the 220V mains grid and charge it for at least 12 hours to ensure that the battery is fully charged. Otherwise, the actual usable capacity of the battery will be much lower than the nominal capacity of the battery. Once the power supply is connected to the mains, it will start charging the battery pack, and press the power button for more than 1 second to start the power, that is, the inverter will be turned on.
Portable power station is of great significance to the utilization of new energy. With the cost of energy storage decreasing year by year, energy storage technology continues to improve, and energy storage is getting more and more attention around the world. Many manufacturers have also begun to step into the portable power station market.
