News
News

The main purpose of the Portable power station

2022-11-11 18:03:46 Shenzhen Partastar Technology Co., Ltd. 0

Mainly used for mobile office, outdoor leisure, outdoor operations, emergency rescue, etc.;

1. As an uninterruptible power supply for outdoor office use, it can link digital devices such as mobile phones, tablet computers, and notebooks;

2. Outdoor power consumption for outdoor photography, off-road enthusiasts, and outdoor power consumption for leisure and entertainment;

3. Electricity for outdoor lighting;

4. Emergency electricity for mines, oil fields, geological exploration, and geological disaster rescue;

5. Emergency power supply for field maintenance by the telecommunications department;

6. Emergency electricity for small and micro emergency medical equipment;

7. Increase the endurance of the UAV during outdoor operations and improve the outdoor operation efficiency of the UAV;

8. Emergency start of the car.

Portable power station

Portable power station compatible equipment
① 12V cigarette lighter port: car charger

② DC 12V/24V port: drones, vehicle products, POS machines, notebook computers, mobile hard disk boxes, projectors, electronic refrigerators, digital photo frames, portable DVDs, printers and other equipment

③ USB/Type-c port: smartphone, tablet, smart watch, digital camera, projector, e-reader, etc.

④ AC port: camping lights, small rice cookers, small kettles, small desk lamps, fans, juice machines and other low-power appliances

charging method
There are mainly several charging methods for such products on the market: AC charging, solar charging, car charging, TYPE-C charging

solar charging

Portable power station and portable solar panels can be used in conjunction with solar energy to charge as long as there is sunlight. A 400W solar panel can fully charge the Portable power station within 4 hours, providing a steady stream of power for various electrical appliances. In addition, the Portable power station mostly adopts universal input interface, which can be compatible with various solar panels on the market. Of course, some products on the market also support multiple solar panels to be connected and charged at the same time. Some can support up to 6 110w solar panels for charging at the same time, so that friends can still enjoy an efficient charging experience outdoors.

AC charging

Anywhere there is alternating current, it can be charged through the AC interface. Similar products of the same capacity level on the market, the charging time is 6-12 hours.

car charger

Users who drive can charge through the car charger port, but compared with AC charging, car charger charging is slower, and it usually takes about 10 hours to fully charge.

Type-C charging

If there is a Type-C input port on the product, it can be charged through this interface.

Portable power station instructions
AC load

The power provided by the Portable power station is the rated load power. Generally, AC load equipment with less than this power can be used normally. However, when some electrical equipment is turned on, its starting power is often greater than its rated power, such as the starting power of inductive load equipment. 6-8 times of its rated power, and the starting power of energy-saving lamps is about dozens of times of its rated power. If their starting power is greater than the peak power of the Portable power station, the overload protection function of the Portable power station will be triggered, and the power will be automatically turned off. output.

Steps

(1) Check the power of the load to ensure that it does not exceed the rated power of the Portable power station itself. If it exceeds, replace it with a Portable power station with a higher power;

(2) Insert the load power plug into the host jack, turn on the power host switch, and then turn on the switch on the load to start normally;

(3) After use, turn off the power switch in time.

Note: ① When the power supply is insufficient, the load power exceeds the power supply power or the temperature is too high, the power supply will activate the protection function;

②The host will automatically shut down when there is no load or low power. After resetting the switch, the power supply will be restored. If it cannot be turned on, please check the power.

③When the power is low, it will make a sound of "DiDiDi".

Online Message

Contact