News
News

Lithium portable power station battery maintenance method

2022-11-22 10:10:18 Shenzhen Partastar Technology Co., Ltd. 0

The portable power station is a backup emergency power supply for outdoor households without power failure, which can directly provide power for small household appliances or digital products. Proper maintenance of lithium batteries for power supplies can prolong the service life of batteries for power supplies. Many people do not know how to maintain lithium batteries for power supplies. Here I would like to share some experience with you, hoping to help you.

Correct maintenance method of lithium battery for power supply:

1. It is forbidden to connect an inductive load to the output port of the lithium battery power supply.

2. When using the lithium battery for power supply, you must abide by the relevant regulations in the product manual or user manual, and ensure that the live wire, neutral wire, and ground wire connected meet the requirements, and users are not allowed to change their mutual order at will.

3. Generally, there are protective measures for battery discharge, but after discharging to the protection shutdown, the battery can return to a certain voltage, but at this time it is not allowed to restart, otherwise the battery will be over-discharged.

4. For the long-term stored power battery, it should be used and charged every 3 to 6 months, otherwise the host and battery will be damaged.

5. Various parameters that should be paid attention to when using lithium batteries, such as input voltage range, output waveform, output power, long power supply time, conversion time, as well as battery brand, machine noise, volume, weight and other parameters.

6. The use environment of lithium batteries should be well ventilated to facilitate heat dissipation and keep the environment clean.

7. Regularly maintain the lithium battery power supply. Clear the dust in the machine, measure the voltage of the lithium battery pack, check the operation of the fan and check the adjusted system parameters, etc.

8. It is forbidden to use overloaded. It is best to control the maximum starting load of the power battery within 80%. If it is overloaded, it will often break down the inverter tube in the inverter state.

How to properly maintain the lithium battery power supply?

When using energy storage products on a daily basis, you usually have the mentality that the battery does not need to be maintained and do not pay too much attention to it, but if you do not use and maintain the lithium battery in the correct way, the life of the battery will be shortened, so in the selection On the basis of regular standard batteries, the batteries must be protected and used reasonably.

Be sure to maintain a suitable temperature to ensure the normal operation of lithium batteries. For a general battery, it should be ensured that the temperature of its environment is between 20 and 25 degrees Celsius. Although we know that a higher temperature can effectively help improve the discharge capacity of the battery, it must be noted that the increase in temperature It will also reduce the service life of the battery. If the external ambient temperature is too high, it will also increase the internal chemical reaction rate of the battery, which in turn will promote the rate of ambient temperature rise. This repeated vicious circle will rapidly accelerate the depreciation of the battery to a large extent, thus affecting Normal use.

Online Message

Contact