News
News

Does the energizer portable power station need maintenance?

2022-11-21 09:54:34 Shenzhen Partastar Technology Co., Ltd. 0

The maintenance of the energizer portable power station has a vital relationship with the life of the energizer portable power station. We must use it on the basis of protecting the power supply. So next time after you buy the energizer portable power station, remember to activate it first, and pay attention to daily maintenance.

1. If the electrical appliance is idle for a long time, its performance will be affected, and it needs to be recharged and discharged at least every three months to activate the battery activity. Any battery-type product will consume power to varying degrees if it is left untouched, and it must be charged and discharged regularly to maintain battery activity during the idle process.

2. Do not store the energizer portable power station in an environment where the room temperature exceeds 60° or is lower than minus 20°. The working environment of the energizer portable power station has its fixed range. The power supply will start a self-protection mechanism, that is, the BMS intelligent management system of P15, which will automatically shut down abnormal energizer portable power stations in time to ensure your electricity safety.

3. In addition to emergency power consumption, the energizer portable power station can also be used for camping, self-driving tours, etc. The outdoor power consumption environment makes the cleanliness of the energizer portable power station not very high. Therefore, occasional cleaning is required, and it should be noted that the surface can be simply wiped with a non-abrasive cloth. If the surface is too dirty, it is also possible to use a special cleaner for computers or mobile phones, and avoid washing it directly with a lot of water.

When you first get the energizer portable power station, don't put it into normal use immediately, because the power in the power supply is only the basic test power when it leaves the factory, not the normal use power. Therefore, in order to activate the battery, we must first use up all the power of the power supply after getting the power supply, until the power supply automatically shuts down, and then charge the battery until it is fully charged to 100%, which is the first activation completed.

Online Message

Contact