How to properly maintain or use the portable battery power station? The main function of the portable battery power station is to store electrical energy. Once the mains power is interrupted, the battery will be discharged and supplied to the inverter. The inverter will convert the direct current released by the battery into a sinusoidal alternating current to maintain Power output, so how do we use portable battery power station correctly in our daily life? The editor of this article is here to tell you.
1. The first charge must be skillful
The portable battery power station is pre-charged at the factory with less power. For a better user experience, please plug it into a 220V power grid and charge it to 100% before using the portable battery power station (refer to the manual for specific charging time). If the power supply is not used for a long time, check its power every 2 to 3 months, and recharge it in time according to the power situation.
2. Reasonable choice of placement
Good placement is very important. The place where the power supply is placed must be well ventilated and kept away from water, flammable gas and corrosive substances. The ambient temperature should be between 0 and 40°C, and the air inlet and outlet should be kept unobstructed. It is forbidden to use or place the product under high temperature (under direct sunlight or in a very hot car), otherwise it may cause risks such as internal battery overheating, function failure, and life shortening.
3. Avoid overloading the portable battery power station
When using the portable battery power station, first determine the power of the load device, and the power of the load device should be less than or equal to the rated power of the portable battery power station. If the power of the load equipment exceeds the power of the portable battery power station, it will cause the portable battery power station to overheat and be protected against overload, making it unusable.
4. The portable battery power station should try to avoid being idle for a long time
For the portable battery power station that has not been used for a long time, check its power every 2 to 3 months, and charge and replenish the power in time according to the power situation; prevent long-term battery self-discharge and circuit self-consumption from causing over-discharge of the power battery and affecting the battery. life.
5. Operation and maintenance
After the LCD display switch button is pressed, the screen display lights up, and the screen backlight is automatically turned off after about 10 seconds; after the DC output and AC output buttons are pressed, when the green light next to the port is on, the output port has been turned on, and the corresponding device can be powered on. To supply power; when the power port output is not in use, press the output button to turn it off to save power.
6. Precautions
It is forbidden to disassemble the portable battery power station product, which may cause unpredictable risks such as fire, explosion or electric shock; it is forbidden to use the product with damaged wires or plugs, or damaged output cables; in order to reduce the risk, Close supervision is required when using this product near children.
